Tischlerei Kurt Behn KG

Brandstücken 34, 22549 Hamburg
Germany
Telephone +49 40 8003449
Fax +49 40 8008156
info@tischlereibehn.de

Hall map

boot 2019 hall map (Hall 12): stand A32

Fairground map

boot 2019 fairground map: Hall 12

Our range of products

Product categories

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.05  Boat Building Materials / Maintenance
  • 03.05.03  Semi Fabricated / Prefabricated Products

Semi Fabricated / Prefabricated Products

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.05  Boat Building Materials / Maintenance
  • 03.05.05  Boat Building Wood / Plywood

Boat Building Wood / Plywood

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.05  Boat Building Materials / Maintenance
  • 03.05.15  Decking
  • 03  Shipping / Yachting Equipment and Accessories
  • 03.05  Boat Building Materials / Maintenance
  • 03.05.20  Fendering

Fendering

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.06  Furnishings
  • 03.06.04  Teak Furnishings

Teak Furnishings

  • 03  Shipping / Yachting Equipment and Accessories
  • 03.08  Tables / Chairs / Covers
  • 03.08.02  Tables / Accessories

Tables / Accessories

Our products

Product category: Boat Building Wood / Plywood

Gratings in wood for the boatbuilding

Product description:

For more than 30 years, we are producing grates for the ship and yacht construction. For this, we use selected woods, mainly from teak. But gratings can also be order in Kebony- or irokowood.
Orders can place according to dimensions sizes or templates. Whether as a single piece or as a series production.
For many types of ships we also offer ready-made gratings. Please take a look therefor in the product area under -> series yachts.

The production:

The gratings can be obtained in 22mm thickness, with optional 10x10mm, 20x20mm or 30x30mm cuboid holes.
The cubed surfaces arise from over-lathed wood strips. The connections to the frame moldings are dowelled.
All glues are waterproof (wbp). All surfaces are finely fine sanded and the outer edges are rounded.
On request, we put your grating on rubber buffers, for a better water drain on the bottom. The delivery is wood natural without any varnish.

More Less

Product category: Decking

Prefabricated wooden decks for yachts

Product description:

The classic for every yacht. Wooden prefabricated decks for the cockpit area or for the gangboard. Seawater resistant, non-slip and beautiful. We use selected woods, mainly in teak- or kebnoywood.
Production takes place, according to dimensions or templates. Whether as a single piece or as a series production. For many types of boats we also offer prefabricated woodendecks. Take a look therefor in our product area under -> series yachts.

The production:
Ready-made deck and prefabricated cockpit covers made of teak or kebony are manufactured by dimensions or templates. The parts can be easily screwed on, glued or fixed with an adhesive. As substructure, we use a 1.0mm thick plastic plate (HPL).
The actual production can be obtained with solid teakdeck in a thickness of 4.8mm, 8mm or 12mm. The Joints are filled with Sikaflex 290DC until to the ground.
All pieces have as border a frame molding around. Other frame moldings are available with extra cost.

More Less

Product category: Tables / Accessories

Saloon tables

Product description:

Saloon tables are manufactured by us with the highest craftsmanship precision. So we pay attention from the beginning to even veneers and selected woods. Depending on your taste you can get the table with columns or string base, bar shelf, drawers and secret compartment.
The table tops are made to your dimensions. All versions are available in teak and mahogany (other types of wood are possible).
All existing fittings are made of nickel-plated brass or stainless steel.

The production:
Salon table top:
The salon table tops are always made to measure. It does not matter, whether square, rectangular or trapezoidal. The outside dimensions may not exceed 1300x700mm.
You can get the table top as a simply continuous plate, with one or both sides hinged side wings and/or additional beverage flap.
You can choose whether you want to have the edge design with anti rolling strips or the table top should better remain flush with the top edge. For better optics, all tabletops get a slight stitch arch on the long edges. The production is based on an 18mm Okumé/Gabon plywood with both sides thick veneers. The visible edgings are evenly applied around the table top. All connections are glued waterproof.
The delivery is fine sanded, otherwise natural.

Table bases:
For the finished table bases, we offer three options. From a simple string-foot basis with a side opening for magazines or other things, over a slightly lower drawn string basis with bar shelf up to the column base with side drawers, bar shelf and secret compartment.
Here too, all compounds are glued waterproof and all surfaces are fine sanded. The delivery is natural.

More Less