C & S DIVE-SPORTS GmbH

Draupromenade 25, 9500 Villach
Austria

Telephone +43 664 88299762
Fax +43 4242 221834

Hall map

boot 2018 hall map (Hall 3): stand G15

Fairground map

boot 2018 fairground map: Hall 3

Our range of products

Our products

Product category: Diving Suits/Jackets

Air bladder for BCD, 20 – 27 liters, design “ONE”

ONE, a BCD Air Bladder with a variable structure, is available with 2 different buoyancy thrusts, so that you can choose the most suitable one for your immersions. You can opt for a 20 or 27 litre to face challenging immersions. In both cases, the BCD Air Bladder ONE has 2 overpressure valves. The outer bladder is made of cordura 1000, while the inner bladder is made of TEXTANE A/B 210 nylon. You can replace the jacket inner bladder thanks to a zip placed in its higher part. There is a polyester protection for the inner bladder and the zip can be concealed. In the central part of the bladder there are 4 cuts. They are used to remove the plates and lighten the jacket. In the bladder central part there is also a HT polyester strip, which is vertically placed right there, where 3 stainless steel grommets are (1 in the higher and 1 in the lower part).   To tighten the 12 latex rings (3×8), there are 12 stainless steel grommets and 2 side big strips. The big strips on the bladder sides have 4 slots and 8 loops (4 per side). 
Monotube
Buoyancy thrusts: 20 or 27 lt

Tank maximum capacity 20 lt: 15 mono-tank or 12+12 bi-tank

Tank maximum capacity 27 lt: 18 mono-tank or 15+15 bi-tank

Overpressure and rapid-discharge valves: 2

More Less

Product category: Diving Suits/Jackets

Air bladder for BCD, 20 or 27 liters, design “PAPEETE”

The BCD Air Bladder “PAPEETE” is a versatile jacket, ideal for first-level divers who want to face scuba technical immersion without buying another BCD. Audaxpro gives you the possibility to choose the Air Bladder for BCD in the suitable buoyancy thrust for your scuba immersions. You can opt for a monotube version of 20 or 27 litres with 2 overpressure and rapid-discharge valves or between the double-tube models of 20+20 or 27+27 litres.Thanks to the double air chamber, to the 4-overpressure valves and the rapid discharge, the double-tube system increases the safety level of this scuba jacket, which is already ensured by the quality of Audaxpro materials and their production technologies.

The outer bladder is made of cordura 1000, while the inner bladder is made of TEXTANE A/B 210 nylon. If necessary, you can replace the jacket inner bladder thanks to a zip placed in the higher part of the bladder. Under the zip, there is a polyester protection for the inner bladder and the zip slider is concealable. In the central part of the BCD bladder, there are 4 cuts to lighten the jacket (removing the plates, SOFT configuration). On the bladder, you can find 12 stainless steel grommets to tighten the latex rings and a HT polyester strip, vertically placed at the bladder centre. Right at the centre of the bladder, this diving BC has also 3 stainless steel grommets, 2 in the higher and 1 in the lower part of the bladder. The big strips on the bladder sides have slots to pass and tighten the 12 latex bands (3×8). The latter ones are necessary to adjust and empty the diving BC air chamber.

More Less

Product category: Diving Suits/Jackets

Air bladder for BCD, 27 – 40 liters, design “ELEVEN”

The BCD Air Bladder “ELEVEN” is really appreciated by many divers for it extra valves that allow a great flexibility in any position. Audaxpro gives you the possibility to choose the Air Bladder for BCD  in the suitable buoyancy thrust for your scuba immersions. You can opt for a monotube version of 27 or 40 litres with 3 overpressure and rapid-discharge valves or between the double-tube models of 27+27 o 40+40 litres. Thanks to its double air chamber, to the 6-overpressure and rapid-discharge valves, the double-tube system increases the safety level of this scuba jacket, which is already assured by the quality of Audaxpro materials and their production technologies.

The outer bladder is made of cordura, while the inner bladder is of TEXTANE A/B 210 nylon. If necessary, you can replace the jacket inner bladder thanks to a concealable zip placed in the higher part of the bladder. There is a polyester protection for the inner bladder. In the central part of the BCD bladder, there are 4 cuts to lighten the jacket (SOFT version), 12 stainless steel grommets to tighten the latex rings and a HT polyester strip, vertically placed at the bladder centre. Right at the centre of the bladder, this diving jacket presents also 3 stainless steel grommets, 2 in the higher and 1 in the lower part of the bladder. The big strips on the bladder sides have slots to pass and tighten the 12 latex bands 3×8. The latter ones are necessary to adjust and empty the BCD air chamber. [/expand]

More Less

About us

Company details

They have been a great passion and an intense experience in the production of technical articles to do AUDAXPRO® one of the most trusted brands in the diving panorama. AUDAXPRO® is our daily point of departure and arrival: our entertainment and our main businesses we invest all our knowledge and our imagination to achieve technologically advanced and cutting edge. We believe in high quality and with maximum safety, which remains our main objective.

More Less