EXD Divegear GmbH

Faulenbergstr. 5, 97076 Würzburg

Telephone +49 931 32061999
Fax +49 931 2087244


Hall map

boot 2017 hall map (Hall 3): stand C29

Fairground map

boot 2017 fairground map: Hall 3

Our range of products

Product categories

  • 08  Diving
  • 08.01  Diving Gear
  • 08.01.01  Basic Sets (Fins, Masks, Snorkels)

Basic Sets (Fins, Masks, Snorkels)

  • 08  Diving
  • 08.01  Diving Gear
  • 08.01.02  Regulator/Compressors


  • 08  Diving
  • 08.01  Diving Gear
  • 08.01.03  Lighting/Underwater Video/Photography

Lighting/Underwater Video/Photography

  • 08  Diving
  • 08.01  Diving Gear
  • 08.01.04  Diving Suits/Jackets

Diving Suits/Jackets

  • 08  Diving
  • 08.01  Diving Gear
  • 08.01.06  Diving Accessories

Diving Accessories

Our products

Product category: Basic Sets (Fins, Masks, Snorkels)

Monowing 30 black/red

This Wing has been designed for the use with singletanks only. The slim and long shape provides a low profile with less drag in the water and a perfect trim.

It has integrated roller bars, which eliminates the need for a single tank adapter.

The inflator elbow is off center on the left side, so it will not interfere with the tank or regulator.

The standard elbow could be replaced by a quick dump valve as option.

This Wing is first choice for all divers looking for a durable, compact, travel friendly and flexible BC. With app. 15l lift it also offers enough lift even for cold water use.

More Less

Product category: Basic Sets (Fins, Masks, Snorkels)

Hybrid Wing black/red

Our Hybrid WIng has ben designed to create a trim device, that can do nearly all. It works for both single tank backmount and double tank sidemount rig, taking only minutes to convert from one to the other. Paired with any backplate or softpack, warm water or cold water diving, it is the only trim device you will need.

The key is a very low profile, streamlined trim device, which cotours to the diver. With its 16kg lift, it still has a much lower profile than most traditional wings. It willnot taco or wrap around the tank, producing higher drag, norwill it allow gas to roll around the bladderproducing instability.

The majority of the lift is placed lower on the body, exactly were it is needed helping the diver to keep a horizontal, flat position.

The Over Pressure Valve and LP hose can be reversed to accomodate back or sidemount rigs.

- Works for single tank backmount and double tank sidemount
- Easy to switch within minutes
- Designed for horizontal diving position
- Low Profile with less drag in water
- Wing always stays closeto the divers body
- OPV and Inflator LP hose could can cbe configured for sidemount and backmount configuration

More Less

Product category: Regulator/Compressors

12l Sidemount Tanks

12l Sidemount Tanks

More Less