Karnic Powerboats Ltd.

P.O. Box 70192, 4161 Limassol
16, Alpeon Street, Industrial Estate of Ayios Sylas, 4161 Limassol
Cyprus

Telephone +357 25 399911
Fax +357 25 399951
karnic@karnicboats.com

Location

Hall map

boot 2017 hall map (Hall 9): stand D42

Fairground map

boot 2017 fairground map: Hall 9

Our range of products

Product categories

  • 01  Boats and Yachts
  • 01.01  Sailing Boats & Yachts
  • 01.01.03  Sailing Yachts/Cabin Boats (Sail)

Sailing Yachts/Cabin Boats (Sail)

Our products

Product category: Sailing Yachts/Cabin Boats (Sail)

Smart1-48

Modular Design with broad selection of modules to achieve more than 100 different layouts to suit needs
Extreme rigidity and positive flotation due to all-composite, foam injected hull structure
Wide beam and ultra large cockpit floor area
Maximum utilisation of space for storage with lockers forward, aft and hatches on floor
Side pockets with separate gunwale cover for accessories installation

More Less

Product category: Sailing Yachts/Cabin Boats (Sail)

1851 Open

Extreme rigidity and positive flotation due to all-composite, foam injected hull structure
Layout flexibility to convert bow seating lounge to sunbed
Choice of different helm arrangements and additional accessories to suit needs
Spacious console compartment with adequate room to fit even a chemical toilet
Large storage space with five drainable wells and stern bilge compartment
Recessed installation of heavy duty styled cleats at bow and stern
Offshore hull design with high freeboards to ensure dry ride
Styled console with double curvature windscreen and oval stainless steel rail
High gunwale height for extra on-board safety
Large usable cockpit floor area

More Less

Product category: Sailing Yachts/Cabin Boats (Sail)

2050

Length Overall 5.95 m
Hull Length 5.90 m
Beam 2.45 m
Draft 0.33 m
Approximate Weight 860 Kg
Fuel Capacity 135 L
Water Capacity 45 L (*)
Waste tank Capacity -
Certification Persons 6
Design Category C
Engine Type Single OB, 25"
Maximum Power 150 hp
Sleeping Adults 2
Cockpit Depth 0.60 m
Freeboard Aft 0.85 m
Freeboard Forward 1.04

More Less

About us

Company details

Five reasons define 'The Distinctive Choice'

1.) Efficient and High Performance Hull Shape
Karnic engineers give high emphasis on the design of hull. In fact, every shape, dimension, edge or corner on each Karnic hull has been designed to serve a purpose. Pronounced and deep spray rails on the hull bottom at the right position and length, reverse shape of chines, variable bottom 'V' angle, the presence of planing pad, waterline beam and topside flair, are significant parameters to achieve an outstanding water behaviour in calm and rough conditions, in motion or at rest.

2.) Structural Coherence and Rigidity
Karnic hulls are reinforced with an 'all-composite' foam injected stringer system designed to provide an ultra stiff structure both in flexure and torsion. Hull stiffness is a critical feature to avoid shape deformation under the high water pressure loads at speed. In fact, a Karnic hull is so stiff that it can be suspended asymmetrically from three points without signs of flexing or twisting. In addition, the material homogeneity distributes stresses evenly and prolongs product lifetime as more vulnerable materials such as wood are eliminated.

3.) High Quality of Build
High quality of build is a principal requirement for every part or component produced by Karnic, covering from the selection of parts and materials to product fabrication and assembly. There are numerous examples of visible features that demonstrate this such as the bonded rather than screwed solid wood cabin door frames, the styled stainless cleats, the all welded rails, the automotive style bonded glass on all closed cockpit models or in the non-visible areas, the osmosis resistance vinylester skin coat standard on all hulls and the use of topcoat on all internal hull surfaces for maximum protection.

4.) Product Style and Detail
Karnic aims in every design to offer unique styling and usable detail with complex modern surfaces to define shapes, well studied ergonomics and balanced space allocation. Although this requires a lot more effort during design and development, it achieves the unique character of all Karnic models and maximises return to owner for a given boat category. It is generally observed that there are more features, detail and space utilisation in a given square meter on a Karnic than the equivalent square meter on a competitive boat of the same category.

5.) High Product Value for Money
Karnic manages to offer a high value product at competitive prices because of the emphasis given in developing and refining a highly efficient production system that is based on accuracy and flexibility to autonomously control quality with more than 150 control points per line. The challenge for Karnic is to minimise production costs by refining and developing methods or processes to increase productivity and eliminate waste rather than sacrificing quality.

More Less