Uflex Srl

Via Milite Ignoto 8 A, 16012 Busalla
Italy

Telephone +39 010 9620310
Fax +39 010 9620333

Location

Hall map

boot 2017 hall map (Hall 11): stand B03

Fairground map

boot 2017 fairground map: Hall 11

Contact

Luca Gentini

Our range of products

Product categories

  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.01  Instruments
  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.14  Engine Remote Controls
  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.22  Control Systems

Control Systems

  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.23  Helm/steering Gear
  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.24  Steering Wheels
  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.25  Hydraulic Systems
  • 02  Engines and Related Equipment
  • 02.02  Engine Parts/Control
  • 02.02.28  Trim System/Trim Tabs

Trim System/Trim Tabs

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.01  Electric/Electric Systems
  • 03.01.01  Shore Power

Shore Power

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.01  Electric/Electric Systems
  • 03.01.06  Batteries/Accessories

Batteries/Accessories

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.01  Electric/Electric Systems
  • 03.01.11  Renewable Energy/Solar Power Technology

Renewable Energy/Solar Power Technology

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.02  Navigation/Communication/Equipment/Electronics
  • 03.02.16  Gauges/Equipment
  • 03  Shipping/Yachting Equipment and Accessories
  • 03.02  Navigation/Communication/Equipment/Electronics
  • 03.02.26  Compasses/Sextants

Compasses/Sextants

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.02  Navigation/Communication/Equipment/Electronics
  • 03.02.30  Speedometers

Speedometers

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.03  Fresh Water Supply/Sewage/Waste Disposal Systems
  • 03.03.05  Pumps/Tanks/Accessories

Pumps/Tanks/Accessories

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.04  Heating/Air Conditioning
  • 03.04.01  Air Conditioners

Our products

Product category: Engine Remote Controls

B501 SERIES

SINGLE LEVER B501 SERIES - TOP MOUNT CONTROLS

Available with and without lock in neutral and with and without trim switches. In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.

FEATURES :

• Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
• Chrome plated high resistance ABS housing control with die cast chrome plated levers
• Push in button disengages shift for warm-up
• X12 neutral safety switch which prevents in-gear starting (optional)
• Exceeds EN ISO 11547 standards when X12 safety switch is installed
• For use with all Ultraflex control cables except C4:

- C14 and MACH14 cables require no kit
- for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
- C5, C16 and MACH5 cables require K60 Kit - 40145E
- C36 and MACH36 cables require K62 Kit - 40157J
- C22 cable requires K61 Kit - 40146G

CONTROLS WITHOUT LOCK IN NEUTRAL
B501CH - 43023 F Single engine, no trim.
B501CHT - 43024 H Single engine, with trim.
B502CH - 43025 K Double engine, no trim.
B502CHT - 43026 M Double engine, with trim.

CONTROLS WITH LOCK IN NEUTRAL
B501CHT/L - 43028 S Single engine, with lock and trim.
B502CHT/L - 43030 C Double engine, with lock and trim.

More Less

Product category: Engine Remote Controls

POWER A MK II - ELECTRONIC REMOTE CONTROL

The e asy to install PowerA Mark II™ control system provi des fingertip operation of throttle and shift levers.

Using reliable and preci se digital data t ransmission, this single or dual function control system is specifically designed to work on mechanically cont rolled as well as e lectronic a nd el ectro- hydrau lic gas a nd diesel
inboards, sterndrives and outboards.
The PowerA Mark II™ comes with many features including Dock Assist, which offers the operator the opportunity to reduce the sensitivity of the throttle function for easier dockside handling.

The Power A Ma rk II i s a sys tem that can repl ace mechanical controls either on fully mechanical engines, or on fully electronical engins, or on engines with the combination of both characteristics.

• Private protocol can bus for data transmission
• Suitable for mechanical shift and throttel as well as electornic throttle and shift
• Connection of multiple stations up to 4 controls
• Modular system
• Direct communication with electronic engines (SAE J 1939 or NMEA 2000)
• Plug´n play connectivity
• Automatic engines synchronization
• Dock assist
• Fully programmable shift delays
• Personalized label upon request
• Available installation also for 3 or 4 engines
• Compatibility with all mechanical throttle engines
• Compatibility with all electronic throttle engines (Cummins, Detroit Diesel, Scania, Iveco, FPT,
• Lombardini, VM Motori, FNM, Yanmar, CMD-Volkswagen, Hyundai ecc.)

Conforms with:

• CEI EN60945
• UNI-EN ISO 11547

More Less

Product category: Hydraulic Systems

GOTECH™ - OBF

GOTECH™ -OBF WHEEL TURNS 4,5
For outboard single engine up to 115 hp. 

GoTech™-OBF - 42634G - package kit contains:

UP18                   Intermediate helm pump
UC81-OBF           Front mount outboard cylinder
OL 150                Hydraulic oil - 2 litres
KIT OB-GT/M      Hose kit diameter, 1/4" 6 m (19.7") length

More Less

Product category: Hydraulic Systems

SVS-28 - SilverSteer™

SVS-28 WHEEL TURNS: 4,3

Specifically designed for high performance and high torque applications, the SilverSteer™ features a 1500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
 
SilverSteer™ SVS-28 package kit contains:

• UP28 F-SVS Front mount helm pump
• UC128-SVS Front mount outboard cylinder. Specify engine type when ordering.
• OL 150 Hydraulic oil 2 litres (0.5 gallons).
• KIT OB-SVS Hose kit with preassembled fittings. Specify length required when ordering.

More Less

Product category: Helm/steering Gear

T91 - HIGH EFFICIENCY STEERING SYSTEM

FEATURING PLANETARY GEAR DESIGN , WHEEL TURNS : 4,2
 
A COMPLETE STEERING SYSTEM CONSISTS OF:

• Steering helm:
T91 - 42647S - single cable steering helm

• Mounting bezel:
X34 - 36654B - black, 90° mounting
X34W - 40654C - white, 90° mounting
X35 - 36655C - black, 20° mounting
X91 - 42850N - chrome, 90° mounting
• Steering cable: M90 Mach (patented)
 
ATTENTION: M90 Mach steering cable is suitable for use also with T85, T71FC, T72FC, T73NRFC, T74NRFC, T81FC, T83NRFC Ultraflex steering helms. M66 steering cable is not fit for T91, T93ZT, T101, T103ZT steering systems.

• Anti-theft device X90 - 42646P (optional)

• Optional steering wheel

• Engine connection kits

FEATURES AND TECHNICAL SPECIFICATIONS:
• Specifically designed for high performance and high efficiency applications
• M90 Mach cable (patented): performance, flexibility and durability increased by top quality materials and construction.
• Fast connect, simple installation, patented end fitting.
• Stainless steel cable output end featuring patented gasket, engine side
• Corrosion resistant materials
• Particularly suitable where clearance is limited
• Optional 90° or 20° installation
• Standard 3/4” tapered shaft
• Lock-to-lock steering wheel turns: approx. 4,2
• Stroke: 228 mm (9”)
• Maximum allowable steering wheel diameter: 406 mm (16”)
• Minimum steering cable bend radius: 150 mm (5.9”)
• Minimal feedback
• Compact for mounting
• T91 steering system is not to be used on boats equipped with engines that exceed the maximum horsepower rating of the boat
• For boats faster than 50 mph our hydraulic steering systems are recommended
• T91 is also available in package with FOURTECH-I
• Exceeds EN 28848 safety standards
• Exceeds ABYC P17 safety standards

More Less

Product category: Steering Wheels

BOCCANEGRA B/CH

Standard 3/4’’ taper• Hub included

• All ULTRAFLEX steering wheels meet the directive 2013/53/EU requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards

More Less

Product category: Steering Wheels

MONTECRISTO B/B/CH

• Standard 3/4’’ taper

• X63 - 40119 D hub with button (to be ordered separately)

• All ULTRAFLEX steering wheels meet the directive 2013/53/EU requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards

More Less

Product category: Control Systems

PADDLE TRIM

For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.

Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without removing his hand from the steering wheel.

FEATURES

• Available both in single and dual versions (for either two equal or two different outputs).

• Both single or dual paddle can be positioned at various angles for the most confortable choice.

• Equipped with one water proof “MOM.ON-OFF-MOM.ON switch ( 2 switches on dual version).

• Max load 5 Amp @ 12VDC.

• For loads exceeding 2 Amp we recommend the use of the KTR - 42860S kit relay.

• Uflex® trim tabs require the use of the KTR - 42860S kit relay.

• Suitable for any kind of steering wheel dish. Max wheel dia. 400 mm (15.7”).

• Easy to install on the following Ultraflex® steering systems:
- front and tilt mount hydraulic helms
- tilt mount mechanical helms

• Wiring harness, labels and mounting hardware kit are included. The mounting plate, which differs between front and tilt mount. Installation, is ordered separately.

More Less

Product category: Trim System/Trim Tabs

UFLEX TRIM TABS

Improve fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions.
Uflex trim tabs have been specifically designed for easy installation using a quick connect bracket-actuator, requiring only one small hole per tab through the transom. The patented transom mounting bracket encapsulates the wiring to ensure protection against any wiring damage.

Uflex trim tab systems are available in 2 versions:

MTS systems for standard installations  

MTC systems for compact installations 

 

FEATURES

• Operating system with hardened steel ballscrew, suitable to withstand high push loads.

• Prompt and easy control with the innovative use of a Joystick (PATENTED)

• AUTO-LINE UP: automatic flap re-alignment function

• Completely sealed thermoplastic resin tab actuators: maximum protection guaranteed by dual seals and a rubber bellow (PATENTED)

• Stainless steel rod and tabs

• The innovative profile of the tabs increases the efficiency of the system 

• The stainless steel top surface of the tabs is mirror polished to give higher resistance to marine environment.
Non polished stainless steel tabs also available.

• Hole hinge design (PATENTED) allows for precise retrofit replacement with Lenco® and Bennett® same size tabs

• Fully maintenance free
• Voltage: 12V DC
• Waterproof: IP68 protection
• CE Certification
• Meets with the EN60945 standards

More Less

Product category: Instruments, Gauges/Equipment

UFLEX® - Marine instruments

FEATURES
• Perimeter-lighted black (ULTRA) or white dial (ULTRA WHITE) with bold graphics
• 12V DC, negative ground
• Black aluminum bezel
• Flat glass lens
• Metric and american scales

Uflex instruments are single tested and CE marked according to the European Standards.

ELECTRONIC FLUX-GATE COMPASS

FEATURES
• Auto compensation
• Easy to install and to read in all weather conditions
• Unaffected by metal objects in the vicinity of the compass indicator
• Includes: remote mounted sensor with 20’ plug in harness, instruction manual and mounting hardware

61076N – ULTRA Style Electronic Compass
61077O – ULTRA WHITE Style Electronic Compass

More Less

Product category: Instruments, Gauges/Equipment

Uflex® Sensors

• Stainless steel
• SAE 5-hole mounting flange or threaded mounting flange
• Resistance rating: 0 Ohm (empty) - 180 Ohm (full) 

• US5 and US3 sensors interface all Uflex fuel and water level indicators

FL-2 - 68417U - Spare flange for US5 sensors, SAE 5 Holes

More Less

Product category: Renewable Energy/Solar Power Technology

HyLander - Self sustainable power unit

HyLander is a hybrid power generator, capable of producing energy from alternative sources such as solar and wind. 

It supplies its output directly to the users or accumulates energy to use it at a later stage, in a quiet and environmental way.

The power is the main characteristic of HyLander, as it is capable of delivering in a constant and silent way, up to 5 kVA with a peak of 10 kW only using the energy stored in the battery. In case of need, it can add extra power from the built-in generator, which intervenes to handle high power consumption, giving continuous autonomy to the system even in the absence of sun and wind.

FEATURES:
• Power supply 230Vac - 50HZ or 115Vac - 60Hz
• Use of environmental compatible renewable energy
• Continuous output power with genset off: 5 kVA
• Continuous output power with genset on: 10 kVA
• Pre-assembled and factory tested, ready for use unit
• Energy from sun and wind at your service 365 days a year
• Built-in backing generator and fuel tank
• Automatic management of energy demand
• Remotely monitored via internet
• High capacity battery pack
• Silent running
• Easily transportable
• Designed and assembled in Italy
• All system components are CE marked

APPLICATIONS:
• Shelters, pastures• Remote cottages, cabins
• Elettrification of rural areas
• Missions
• Pumping water
• Civil protection
• Schools and hospitals in not grid-connected areas
• Telecomunications• Monitoring Stations
• Natural reserves
• Not grid-connected small islands
• Forest ranger Stations
• Public events
• ...and everywhere you need energy, in a quiet, clean and inexpensive way!

More Less

Product category: Air Conditioners

UFLEX® - MARINE AIR CONDITIONING SYSTEMS

In order to have a solution even when the spaces are minimal, Uflex® introduces the Compact 6-SC, the super-compact air conditioning self contained unit that in just 43 cm in length and 26 cm in width develops 6500 BTU of cooling power, distributed by two or three pre installed outlets

Advantages: 
• Unit extremely compact in dimensions 
• Brushless fan with high efficiency and low noise
• Max electrical power absorbed 550 W (in cooling)
• Configurations available with 1, 2 or 3 outlets
• Wireless remote control included

Easy to install:
With its compact dimensions and low weight, the Compact 6-SC can be installed on all types of boats.

The Compact 6-SC can be installed with 2 or 3 air output grilles without the need to use any T or Y additional

More Less

Product category: Engine Remote Controls

MACH™ series High efficiency and flexibility engine control cables

MACHZero 87 mm (3.4”) For use with inboard, sterndrive and outboard engines. Ideal for high performance applications, long cable runs and complex routings. Blue color jacket.
MACH5 Stroke: 95 mm (3.75”). For Mercury® and Mercruiser® engines. Blue color jacket High performance applications
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket High performance applications
MACH36 Stroke: 87 mm (3.4”). For Mercury® and Mercruiser® engines and Mercury® Generation II™ series controls. Blue color jacket High performance applications

More Less

About us

Company data

Foundation

1935

Area of business

Shipping/Yachting Equipment and Accessories