Gebo Marine Glazing B.V.

P.O. Box 60277, 1320 AN Almere
Versterkerstraat 1, 1322 AN Almere

Telephone +31 36 5211212
Fax +31 36 5211271


Hall map

boot 2017 hall map (Hall 11): stand C57

Fairground map

boot 2017 fairground map: Hall 11

Our range of products

Product categories

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.05  Boat Building Materials/Maintenance
  • 03.05.16  Windshields


  • 03  Shipping/Yachting Equipment and Accessories
  • 03.05  Boat Building Materials/Maintenance
  • 03.05.17  Windows/Bull's Eyes/Hatches

Windows/Bull's Eyes/Hatches

  • 03  Shipping/Yachting Equipment and Accessories
  • 03.05  Boat Building Materials/Maintenance
  • 03.05.24  Hatches/Cowls

Our products

Product category: Hatches/Cowls

Standard Deckhatches without flange

For a smoother profile, the frame on our standard hatches has been extended to fit flush against the base mounting. The base mounting screws are covered by the frame for a smoother appearance and extra safety. Deep grooves in the lower frame provide a 100% watertight assembly.

More Less

Product category: Windows/Bull's Eyes/Hatches

Gebo Slim Line


The Gebo Slim Line windows are suitable for CE areas B-C-E. Due to the sleek appearance, the Slim Line windows fit perfectly with the other Gebo marine glazing products.

All joints of the Slim Line windows are hard soldered for a watertight finish. The glass is fitted in a sealant bedding between the outer and inner aluminium frames. The inner rim is fixed with M4 screws to the outer frame. The fastenings in the internal rim are covered by a black rubber filler strip.

As with the Thermic Line windows, the Light Line windows are made with silicone rubber. Unlike EPDM rubbers, silicone rubbers do not dehydrate and for years, they retain their resili- ence. The Slim Line windows can be delivered with round and mitred corners.

The Slim Line Windows are suitable for a glass thickness of 5 mm, 6 mm and 8 mm. Upon request, the Slim Line windows are fitted with insulated glass.


The windows are fitted by clamping the inner frame onto the back of the outer frame.

The inner frame is mounted onto the outer frame by simply screwing the inner rim onto the
back of the outer frame by means of M4 screws.

More Less

Product category: Hatches/Cowls

sliding hatches

The standard Gebo sliding hatches are manufac- tured from the proven Gebo deckhatch profile. By using this profile, the sliding hatches fit perfectly with the other Gebo marine products.

More Less

About us

Company details

Our brand was created more over 50 years ago and with a single vision: to supply boatbuilders with glazing products that would enhance the appearance, and the value of the craft in which they were fitted.

As his business rapidly developed through four decades into the new millenium, so too did the Gebo concept of integrated glazing.

It’s a concept that has been enthusiastically supported by designers and naval architects, who have seen the importance of co-ordinated glazing in boat design and styling. And by builders who wanted all the options and flexibility that a specialist supplier could offer – and all the convenience and economy of a ‘single-source’ supplier too.

Today the Gebo vision perfectly matches the needs of modern-day boat designers, naval architects and builders – through both modular ‘standard range’ products, and versatile, economical custom-built solutions.
In fact, no other marine glazing manufacturer can work as closely or as flexible with your team to preserve the original design concept with the fewest compromises.

More Less