Yanmar announces new diesel engine series

Yanmar 6BY shaftdrive

Yanmar Marine is introducing four engines in its new-generation BY series, developed under a close working relationship with luxury car manufacturer BMW. The company says that the combined technologies of these two market leaders should set new standards for high performance marine engines and significantly widen the propulsion package choice for boat builders and their customers.

Lighter, more compact and cleaner
These are four-cylinder diesels at 150MHP (110kW) and 180MHP (132kW), plus six-cylinder models at 220MHP (162kW) and 260MHP (191kW), rated speed 4,000 rpm. They will be available for shaftdrives and sterndrives. At two litres and three litres, they are lighter, more compact and cleaner than the models they replace. The engine dry weights are 250kg and 310kg respectively. Length (with gear, to output flange) by width by height of the 180MHP 4BY180 is 882x758x740 and the 260MHP 6BY260 is 1151x758x740. All of the engines in the range meet the new EPA Tier 2 and European RCD emissions regulations.

Turbocharged and intercooled
These Yanmar diesels are similar in weight to petrol engines of equivalent capacity, and produce a similar rate of acceleration. Electronic control is by second-generation common rail with magnetic injectors and the engines include a CAN bus system using NMEA 2000 protocol. They are turbocharged and intercooled. The turbocharger on the inboard fourcylinder and all the six-cylinder models is wastegated. The four engines are available with the latest Kanzaki marine gears or a choice of Bravo One, Bravo Two or Bravo Three sterndrives, developed specially for diesels.

Homepage: ww.yanmarmarine.com